Instruction manual

1. Components Overview
68
1.7.2 XFP
To use an XFP, insert it into an XFP slot in the switch.
The XFPs supported by the devices are listed in Table 1-33 XFP List.
Table 1-33 XFP List
(1) XFP-SR (T)
Figure 1-76 External Appearance
(1) Label information: ALAXALA XFP-SR (T)
(2) Handle color: Ivory
Number Module name Interface
1 XFP-SR (T) 10 Gigabit Ethernet 10GBASE-SR
2 XFP-LR (T) 10 Gigabit Ethernet 10GBASE-LR
3 XFP-ER (T) 10 Gigabit Ethernet 10GBASE-ER
4 XFP-ZR (T) 10 Gigabit Ethernet 10GBASE-ZR
Laser beam, which is colorless and invisible, is used. Do not directly look into the
optical transmitter/receiver part.
Do not attach other labels to the transceiver.
The transceivers have labels to certificate that they are standard products of the manufacturer
or ALAXALA. These labels are attached so as not to disturb heat radiation from the transceiver
or the mechanism to avoid dropping from the cage.
Attaching a label on an interfering part with heat radiation or the mechanism to avoid dropping
from the cage might cause failure in the transceiver or damage to the device.
Make sure to use our standard products with the label shown in the figure. Otherwise, correct
operation is not guaranteed.