Instruction manual

1. Components Overview
63
1.7 Transceiver
1.7.1 SFP
To use an SFP, insert it into a switch SFP slot. The SFP type can be identified by the color indicated by the arrows in the
figure. Note that which SFPs are supported depends on the switch. For compatibility between the switch and SFPs, see
Table 1-32 SFP List.
Table 1-32 SFP List
*1 Connections can be established with SFP slot ports 5 to 24.
*2 1000BASE-BX10-U and 1000BASE-BX10-D are paired for use.
*3 1000BASE-BX40-U and 1000BASE-BX40-D are paired for use.
Number Module name Interface Supported models
1 SFP-T (T) Ethernet 10/100/1000BASE-T
(PoE not supported)
AX3630S-24S2XW
*1
AX3640S-24SW
*1
AX3640S-24S2XW
*1
2 SFP-SX (T) Gigabit Ethernet 1000BASE-SX All models of the AX2400S series and AX3600S
series
3 SFP-SX2 (T) Gigabit Ethernet
1000BASE-SX2
4 SFP-LX (T) Gigabit Ethernet 1000BASE-LX
5 SFP-LH (T) Gigabit Ethernet 1000BASE-LH
6 SFP-BX1U (T) Gigabit Ethernet
1000BASE-BX10-U
*2
7 SFP-BX1D (T) Gigabit Ethernet
1000BASE-BX10-D
*2
8 SFP-BX4U (T) Gigabit Ethernet
1000BASE-BX40-U
*3
9 SFP-BX4D (T) Gigabit Ethernet
1000BASE-BX40-D
*3
The SFPs (except for SFP-T (T)) use laser beams that are colorless and invisible. Do
not directly look into the optical transmitter/receiver part.
Do not attach other labels to the transceiver.
The transceivers have labels to certificate that they are standard products of the
manufacturer or ALAXALA. These labels are attached so as not to disturb heat radiation from
the transceiver or the mechanism to avoid dropping from the cage.
Attaching a label on an interfering part with heat radiation or the mechanism to avoid
dropping from the cage might cause failure in the transceiver or damage to the device.