Instruction manual

1. Components Overview
62
1.6 Memory Card
A memory card is inserted in the memory card slot of the main device.
The memory card is used for the following:
• Backing up operating information.
• Saving troubleshooting information in the event of a failure.
• Updating the switch software.
(1) SD128 (T)
Below is an SD memory card with a 128-MB capacity.
Figure 1-66 External Appearance
Label information: ALAXALA SD128 (T)
Make sure to use our standard products with the label shown in the figure. Otherwise, correct
operation is not guaranteed.
The memory card can be written to approximately ten thousand times.