Instruction manual

1. Components Overview

1.1.11 AX3630S-24S2XW/AX3640S-24S2XW Models

The AX3630S-24S2XW and AX3640S-24S2XW models have the following hardware specifications:

• Ethernet 10/100/1000BASE-T ports: 4

• SFP slots: 24

• XFP slots: 2

• Memory card slot: 1

• CONSOLE port: 1

• Power supply slots: 2

(1) External Appearance

Figure 1-34 Front View

(1) Memory card slot

(2) CONSOLE port

(3) XFP slot

(4) 10/100/1000BASE-T Ethernet port

(5) SFP slot

(6) Tamper-evident security tape

Since switch ports 1 to 4 are shared by the SFP slots and 10/100/1000BASE-T, the ports cannot

be assigned to both SFP and 10/100/1000BASE-T at the same time. Configure each port so

that it is either assigned to an SFP slot or as a 10/100/1000BASE-T port. (By default, ports 1 to

4 are SFP slots.)

For details about editing the configuration, see the Software Manual.

For information about the SFPs and XFPs supported by the switch, see 1.7.1 SFP and

1.7.2 XFP.

Do not peel off the tamper-evident security tape. Removing the tape makes the warranty null

and void.