Instruction manual

4. Installation of the Components
144
4.10 Connecting a Setup Terminal
Connect a setup terminal to the CONSOLE port of the main device.
For this connection, use an RS-232C crossover cable with D-sub 9-pin female connectors on both ends.
Figure 4-42 Connection Schematic of the Setup Terminal
(1) Setup terminal
(2) RS-232C cable
(3) CONSOLE port
[Step 1]
Connect an RS-232C cable to the CONSOLE port of the main device.
Figure 4-43 Connecting the RS-232C Cable
(1) RS-232C cable
(2) CONSOLE port
[Step 2]
Connect an RS-232C cable to the setup terminal in the same way.
Tighten the screws after the connection and confirm that the connector is securely fastened.