Instruction manual

4. Installation of the Components
137
4.7.2 Inserting and Removing the Dummy Memory Card
When no memory card is used, insert the dummy memory card (hereinafter dummy card) into the memory card slot of
the device as a substitute.
The dummy card is supplied together with the main device. After the device is installed, follow the procedures below to
use the dummy card.
(1) Inserting
Hold the dummy card with the large cutout on the left. Insert it until you hear a click and then release your finger
slowly.
Figure 4-31 Inserting the Dummy Card
(1) Dummy card
(2) Memory card slot
Be sure to remove the dummy card before moving the main device. Excessive stress applied
to the dummy card during transfer might damage the connector part of the memory card slot.
When inserting the dummy card, do not push it too strongly or too quickly. Otherwise, the
connector part of the memory card slot might be damaged.
Clean the memory card slot with a dry cloth if it is dusty.