Instruction manual

4. Installation of the Components
136
(2) Removing
[Step 1]
Push the memory card once until you hear a click. The lock is released and the memory card is ejected a little.
Figure 4-29 Removing the Memory Card
(1) Memory card
[Step 2]
Remove the memory card.
Figure 4-30 Removing the Memory Card
The device is accessing the memory card while the ACC LED is lighting. Do not remove the
memory card or turn off the device. Otherwise, the memory card may be damaged.
In addition, some commands take long time to complete accessing the memory card after
entered. Confirm the access has ended before removing the memory card or turning the power
supply off.
Do not forcibly pull the locked memory card to remove it. Otherwise, the connector part of the
memory card slot might be damaged.
After the memory card is removed, insert the dummy memory card.