Instruction manual

4. Installation of the Components
135
4.7 Inserting and Removing Memory Cards and the
Dummy Memory Card
4.7.1 Inserting and Removing Memory Cards
(1) Inserting
Hold the memory card with the cut-off corner on the right. Insert it into the device until you hear a click and then
release your finger slowly.
Figure 4-28 Inserting the Memory Card
(1) Memory card
(2) Memory card slot
Be sure to remove the memory card before moving the main device. Excessive stress applied
on the memory card during transfer might damage the connector part of the memory card slot.
When inserting the memory card, do not push it too strongly or too quickly. Otherwise, the
connector part of the memory card slot might be damaged.
Insert a memory card after removing a dummy memory card if it is inserted.
To avoid deleting and writing data, slide the protection switch to Lock.
Clean the memory card slot with a dry cloth if it is dusty.