Instruction manual

4. Installation of the Components
132
4.6.2 Stand-by Power Supply Cable
Use the stand-by power supply cable to connect the EPU with the main device.
Figure 4-25 Connection Schematic of the Stand-by Power Supply Cable
Make sure to use the accessory power supply cable. Other cable except the bundled
one may cause a fire and/or an electric shock.In addition, use the accessory cable only
for these devices. Otherwise, a fire and/or an electric shock may be the result.
When the device is mounted in a rack, fasten the power supply cable with the cable holder of
the rack in order to avoid stress on the cable connection part.