Instruction manual

4. Installation of the Components
130
(1) Connecting
[Step 1]
Connect the accessory power supply cable to the AC power connector on the back face of the EPU.
Figure 4-23 Attaching the Power Supply Cable
(1) Stand-by power supply connector (with protective cap)
(2) Cable clamp
(3) AC power supply cable
(4) AC power connector
(5) Main power switch
Make sure to use the accessory power supply cable. Other cable except the bundled
one may cause a fire and/or an electric shock.In addition, use the accessory cable only
for these devices. Otherwise, a fire and/or an electric shock may be the result.
Keep the protective cap in place, except when attaching the cable. Otherwise, a fire
and/or an electric shock may be caused.
Prior to connecting/disconnecting the power supply cable, turn off the main switch of the EPU.