Instruction manual

4. Installation of the Components
128
[Step 4]
Attach the cable connector to the power supply. Insert the connecter until you hear a click.
Figure 4-22 Attaching the Cable Connector
(1) Cable connector
(2) DC power connector
(3) Power supply
(2) Disconnecting
[Step 1]
Remove the cable connector from the power unit. Push the tabs on the both sides and pull it out.
[Step 2]
Push the buttons of the cable connector to remove the DC power supply cable.
[Step 3]
Detach the ground cable from the device.
Prior to attaching or detaching the cable connector, turn off the power.
Prior to attaching or detaching the cable connector, turn off the power.
Prior to attaching or detaching the power supply cable, shut off your electrical power
equipment. Otherwise, a fire or an electric shock might result.
Put the detached cable connector into the power unit.