Instruction manual

4. Installation of the Components
127
[Step 3]
Attach the DC power supply cable to the cable connector.
1. Push the buttons using a screwdriver head. The buttons are locked when pushed to the end.
Figure 4-20 Attaching the Power Supply Cable 1
(1) Button (white)
(2) -48V
(3) 0V
(4) Button (red)
2. Insert the power supply cables and replace the buttons to secure the cables.
Figure 4-21 Attaching the Power Supply Cable 2
(1) DC power supply cable
(2) -48V
(3) 0V
Peel the DC power supply cable jackets (on the device side) to 8 to 10 mm.Too
short a sheath length might result in poor contact or disconnected cable. On the
contrary, too long a sheath length might expose the core wire and cause an electric
shock.