Instruction manual

4. Installation of the Components
126
(1) Connecting
[Step 1]
Attach the ground cable to the device.
Figure 4-18 Attaching the Ground Cable
(1) M4 × 8 screw
(2) Ground cable
(3) Ground terminal
[Step 2]
Remove the cable connector from the power unit. Push the tabs on the both sides and pull it out.
Figure 4-19 Removing the Cable Connector
(1) Cable connector
(2) Power supply
Make sure to connect the ground cable to the ground terminal. Not connecting the
grounded outlet to the device can cause electric shocks, as well as cause failures due
to electrical noise.