Instruction manual

4. Installation of the Components
113
Figure 4-7 Attaching the Rack Mounted Brackets (50 mm Adjustment)
(1) Rack mounted bracket (L)
(2) Rack mounted bracket (R)
(3) M3 × 6 screws (12)
Use the accessory screws to attach the rack mounted brackets to the EPU.
There are two types of rack mounted brackets:
• For AC and DC power models
• For AC (PoE) and power redundancy models and EPUs
The latter is labeled "24P/EPU”. Confirm that the correct brackets have been selected before
attaching the brackets to the device.
The left bracket is marked with an “L”, and the right with an “R”.