Instruction manual

4. Installation of the Components
111
4.4.1 Table Mount
The EPU can be placed on the level, stable, flat surface. The installation procedures are as follows:
[Step 1]
Flip the EPU upside down on a flat surface.
[Step 2]
Attach the four rubber pads within the marks on the bottom of the EPU.
Figure 4-5 Attaching the Rubber Pads
(1) Rubber pad
(2) Mark
[Step 3]
Flip the EPU back over and mount it on the table.
Confirm that the position to attach the rubber pad has no dirt. Wipe any dirt off with a dry cloth
before attaching the rubber pad.