Instruction manual

4. Installation of the Components
107
4.3.2 Rack Mount
This device can be installed into a 19-inch cabinet rack conforming to the EIA standard. The procedure is as follows:
[Step 1]
Attach the rack mounted brackets to the device.
Figure 4-2 Attaching the Rack Mounted Brackets
(1) Rack mounted bracket (L)
(2) Rack mounted bracket (R)
(3) M3 × 6 screws (12)
The accessory rack mounted brackets are compatible with M5 screws. Use a rack compatible
with M5 screws.
For rack-mounting conditions, see (2) 19-Inch Cabinet Rack in 2.7 Place to Install.
If 100 mm of space for cables cannot be provided in front of the device, shift the rack mounted
brackets by 50 mm so that they protrude, as shown in the figure below.