Instruction manual

2. Preparation for Installation
79
2.3 Electrical Power Equipment
2.3.1 Electrical Power Equipment for 100 V AC
(1) Standards for Electrical Outlets
Use the electrical outlets conforming to the following JIS or NEMA standard. These electrical outlets are available at
general electrical contractors.
Table 2-9 Standards for Electrical Outlets
Figure 2-2 Two-Pole Grounded Outlet (15 A/125 V)
(2) Distribution Board
The branch circuit to supply power to the device requires circuit breakers that meet the following specifications:
• Rated breaking capacity: 15 AT with single phase 100 V AC (for a 15 A circuit)
Standard Specifications
JIS C-8303
15 A/125 V, 2-pole grounded straight-blade
receptacle
NEMA 5-15R
Make sure to connect the AC power model to a grounded outlet. Not connecting the
grounded outlet to the device can cause electric shocks, as well as a cause of failure
due to electrical noise.
For easy operation, it is recommended that the distribution board be installed in the same room
as the device or in an adjacent room.