Specifications

3. Operations Required for Initial Installation

 Configuration command mode

In administrator mode, entering the configure command puts you in configuration

command mode.

In this mode, you can use the configuration command to set and change the

configuration of the Switch.

NOTE

Configuration command mode has a hierarchical structure.

(config)# in the above table is called global configuration mode. Below this

prompt, input modes are categorized according to the type of commands available.

For details about configuration command mode, see the applicable Software

Manual Configuration Guide.

NOTE

For details about the command input modes in which operation commands can be

executed, see the manual Software Manual Operation Command Reference.

For details about the command input modes in which configuration commands can

be executed, see the manual Software Manual Configuration Command Reference.