Specifications

2. Installing a Switch
42
2. Connect the standby power cable to the EPU (press the cable until you hear a click).
Figure 2-34 Connecting the standby power cable (on the EPU side)
(1) Standby power connector (with a protection cap)
(2) Connector for supplying standby power
(3) Standby power cable
Do not remove the protection cap except to connect a cable. Using a switch with no
protection cap could result in a fire or electric shock.
CAUTION
Before connecting or disconnecting a standby power cable, set the power switch of
the power supply module in the applicable slot to OFF.
NOTE
When supplying standby power to multiple switches from a single EPU, connect the
standby power cable to standby power connector 2 and subsequent connectors.
When doing so, remove the protection cap before connecting the standby power
cable.
Make sure you keep the removed protection cap in a safe place.