Specifications

2. Installing a Switch
40
CAUTION
Before connecting or disconnecting a power cable, use the power switch to turn the
Switch off.
NOTE
When a switch is installed in a rack, use the cable holder supplied with the rack to fix
the power cable in order to prevent stress on the cable base.
NOTE
For details about the specifications for the specified power cable, see the
AX3800S/AX3600S/AX2400S Hardware Instruction Manual.
[Step 4] Connecting a power cable to the EPU
This section describes how to connect the power cable to the EPU.
Connect the AC power cable and the standby power cable, which supplies standby power
to the Switch.
Always use a grounded outlet. Failure to do so might not only result in electric shock,
but it might also introduce unwanted electrical noise that could cause a switch
failure.
NOTE
When a switch is installed in a rack, use the cable holder supplied with the rack to fix
the power cable in order to prevent stress on the cable base.
NOTE
The figure below shows an example for EPU-A. Use the same procedure to connect
a cable to EPU-B.