Specifications

2. Installing a Switch
35
[Step 2] Installing the EPU and power supply module
Install the EPU in the 19 inch cabinet rack. If you plan to supply standby power to multiple
switches from a single EPU, install the power supply module in the EPU.
When moving an EPU, do not hold the handle of the power supply module. The
handle might come off, resulting in the switch falling and possibly causing injury. In
addition, the module might become damaged, resulting in a fire or electric shock.
NOTE
When placing the EPU on a desk, see the AX3800S/AX3600S/AX2400S Hardware
Instruction Manual.
NOTE
The supplied rack mounting brackets are designed for M5 screws. Prepare a rack
that accommodates M5 screws.
1. Attach the rack mounting brackets to the EPU.
Figure 2-28 Attaching rack mounting brackets to the EPU
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) Screws (M3 x 6 for each bracket, 12 screws in all)
NOTE
When installing the EPU in a rack, if you cannot maintain a 100-mm space (for
cables) in front of the EPU, slide the rack mounting brackets 50 mm toward you and
attach them as shown in the following figure.