Specifications

2. Installing a Switch

Figure 2-26 Attaching rack mounting brackets to the Switch (brackets moved 50 mm

forward)

(1) Rack mounting bracket (L)

(2) Rack mounting bracket (R)

(3) Screws (M3 x 6 for each bracket, 12 screws in all)

NOTE

Use the supplied screws when attaching the rack mounting brackets to the EPU.

NOTE

Four types of rack mounting brackets are available:

 For the AC model and DC model: 12 screw holes

 For the AC model (PoE), redundant power models (AX3630S and AX3640S

series models) and the EPU: 12 screw holes (with a label " 24P/EPU")

 For a redundant power model (AX3650S): 10 screw holes

 For a redundant power model (AX3830S): 20 screw holes

Use the correct brackets when attaching brackets to a switch.

NOTE

Rack mounting brackets are provided on the left and right sides. The left rack

mounting bracket is marked with an " L", and the right with an " R".