Specifications

2. Installing a Switch
30
Figure 2-22 Turning on the power (redundant power models (AX3630S and AX3640S
series models))
(1) Power switch
NOTE
When redundant power supplies are installed for a redundant power model, if only
one of the power switches is set to ON, a power supply error might be detected (and
the ST1 LED will blink red).
Setting both power switches to ON removes the error state.
Figure 2-23 Turning on the power (redundant power models (AX3650S and AX3830S
series models))
(1) Power switch
NOTE
When redundant power supplies are installed for a redundant power model, if only
one of the power switches is set to ON, a power supply error might be detected (and
the ST1 LED will blink red).
Setting both power switches to ON removes the error state.