Specifications

2. Installing a Switch

1. Connect the setup terminal to the CONSOLE port of the Switch. Use an RS-232C

cross cable for the connection.

Figure 2-19 Connecting a setup terminal

(1) Setup terminal

(2) RS-232C cross cable

(3) CONSOLE port

NOTE

After the setup terminal is connected to the port, tighten the screws. Also make sure

the terminal is firmly connected.

NOTE

For details about RS-232C cross cables, see 1.4 Preparing a setup terminal and

cables.

2. Start the setup terminal.

3. Start the communication software.

4. Configure the communication software.

NOTE

For details about the communication parameters, see 1.4 Preparing a setup terminal

and cables. For details about how to configure the communication software, see the

documentation for the communication software.