Specifications

2. Installing a Switch

NOTE

For details about the specifications for the specified power cable, see the

AX3800S/AX3600S/AX2400S Hardware Instruction Manual.

 AC power cable (redundant power models (AX3630S and AX3640S))

Connect power cables to all power supplies. (Connect the supplied power cable to the AC

power connector on the rear of the Switch.)

Figure 2-7 Connecting the AC power cable (redundant power models (AX3630S and

AX3640S))

(1) Cable clamp

(2) AC power cable

(3) AC power connector

When using this switch at 100 V AC, use the supplied power cable. Using another

cable could result in a fire or electric shock.

In addition, do not use the supplied power cable with another switch. Doing so could

result in a fire or electric shock.

When using the switch at 200 V AC, use a power cable that satisfies the specified

specifications. Using another power cable could result in a fire or electric shock.

Always use a grounded outlet. Failure to do so might not only result in electric shock,

but it might also introduce unwanted electrical noise that could cause a switch

failure.

CAUTION

Before connecting or disconnecting a power cable, turn off the power to the device

to be installed or removed.