Specifications

2. Installing a Switch

Figure 2-5 Installing a Switch in the rack (AX3800S)

(1) Screws (M5 x 8)

(2) 19-inch cabinet rack

Before installing an EPU in a rack, make sure the device is stable. If the switch is not

positioned correctly, injury could result from falling equipment or stumbling over the

equipment.

NOTE

When installing an EPU in a rack, use the supplied M5 screws.

NOTE

For AX3800S series switches, the attachment position of the front and rear rack

mounting brackets can be adjusted according to the distance between the front and

rear posts (620 mm to 655 mm, 720 mm to 755 mm, 770 mm to 805 mm, and 820

mm to 855 mm).