Specifications

2. Installing a Switch
10
2.1 Installing a Switch
This section describes the procedure for installing the Switch into a 19-inch cabinet rack
and turning on the power.
2.1.1 Installing only the Switch
[Step 1] Installing the Switch
Use the following procedure to install a Switch into a 19-inch cabinet rack.
When moving a redundant power model, do not hold the handle of the power supply
unit or the fan unit. The handle might come off, resulting in the switch falling and
possibly causing injury. In addition, the module might become damaged, resulting in
a fire or electric shock.
NOTE
When placing the EPU on a desk, see the AX3800S/AX3600S/AX2400S Hardware
Instruction Manual.
NOTE
The supplied rack mounting brackets are designed for M5 screws. Prepare a rack
that accommodates M5 screws.
NOTE
For AX3830S and AX3650 series switches, some space around the memory card
slot is required for installation and removal. If the Switch is installed under another
device, leave adequate space, keeping in mind that objects will protrude from the
front of the device, such as optional parts and cables.