Specifications

Safety Information
Safety-15
Make sure that you use a valid combination for the transceiver and the Switch.
 The switches below support SFP-FX and SFP-FX (T). Use the transceiver only with
the indicated switches. Not doing so could result in a Switch malfunction.
- AX3640S-24SW (ports 5 to 24)
- AX3640S-24S2XW (ports 5 to 24)
- AX3650S-20S6XW (ports 1 to 20)
 The switches below support SFP-SX2 and SFP-SX2 (T). Use the transceiver only with
the indicated switches. Not doing so could result in a Switch malfunction.
- AX2430S series switches
- AX3630S series switches
- AX3640S series switches
- AX3650S-20S6XW (ports 1 to 20)
Do not turn off the Switch while the ST1 LED is blinking in green (on: 0.5
seconds, off: 0.5 seconds).
 For the period below, do not turn off the Switch until the ST1 LED on the front panel of
the Switch changes from blinking green (on: 0.5 seconds, off: 0.5 seconds) to a
constant green. Failure to do so could result in a switch failure.
 While software is being updated
When carrying or packing a Switch and an optional module, wear a wrist strap to
protect against static electricity.
 Be sure to wear an antistatic wrist strap. If you handle the Switch without wearing an
antistatic wrist strap, the Switch might be damaged by static electricity.
When carrying and packing optional modules, handle them carefully.
 Do not touch a connector when carrying or packing a transceiver, direct attach cable,
memory card, power supply unit, fan unit, or power module. Also, when storing a
module, use an antistatic bag.
Use care when handling an air duster.
 Use an air duster specially designed for cleaning optical connectors. Using another
type of air duster could cause the ferrule tip to become dirty.
 Keep the nozzle or container of the air duster from coming into contact with the ferrule
tip. Contact could result in a malfunction.