Specifications

Safety Information

Safety-10

Do not install the Switch in a dusty or humid location.

 Do not install the Switch in a dusty or humid location. Doing so could result in fire or

electric shock.

 Condensation might form on the surfaces and the inside of the Switch if it is moved

from a cold location to a warm location. Using the Switch in this condition could result

in fire or electric shock. After moving the Switch between two locations with a large

temperature variation, let the Switch stand a few hours before using it.

Do not step on the Switch, lean against it, or place anything on it.

 Do not step on the Switch, lean against it, or place anything on it. Doing so might

damage the Switch. Furthermore, the Switch might fall or lose its balance, resulting

in injury.

 Do not place anything that weighs more than 5 kg on the Switch. Doing so might

damage the Switch. Furthermore, the Switch might fall or lose its balance, resulting

in injury.

Do not touch the inside of the Switch with your hands.

 Do not carelessly put your hands inside the Switch. The frame and components might

cause injury.

Install fan units into slots of a redundant power model that do not contain power

supply units (AX3630S and AX3640S series models).

 Install a fan unit for the slot of a redundant power model without power supply units

(AX3630S and AX3640S). If you use the Switch without installing a fan unit, one of

the following errors might occur:

- The temperature inside the Switch will rise and can cause a failure.

- You might be injured by a moving part.

- A foreign object might fall into the Switch, causing a failure.

- The electronic interference generated by the Switch affects other devices and vice

versa, which can cause a failure.