Specifications

Safety Information
Safety-7
Do not place the Switch in a place where it is unstable.
 If placing the Switch on a desk, lay it on its side on a workbench capable of
withstanding the weight of the Switch. If, for example, you place the Switch on a
shaky table or a tilted surface, the Switch might fall and possibly injure someone.
 When installing the Switch in a rack, make sure the Switch in the rack is stably
positioned. If the Switch is not positioned correctly, injury could result from falling
equipment or stumbling over the equipment.
Do not remove the Switch cover.
 Do not remove the Switch cover. Doing so could result in electric shock. The following
label is affixed to a Switch.
Do not block the ventilation slots.
 Do not cover the ventilation slots of the Switch. Doing so causes heat to accumulate
inside the Switch and could result in a fire. Leave at least 50 mm of space in front of
ventilation slots.
Do not allow hair or objects near the ventilation slots.
 Because cooling fan units are mounted in the Switch, do not allow anything near the
ventilation slot. Doing so causes heat to accumulate inside the Switch and could
cause a failure. Do not allow hair or other objects near the ventilation slots because
they might be sucked into the Switch, resulting in injury.
When moving the Switch, do not hold the handle of the power supply unit, fan
unit, or power supply module.
 When moving a redundant power model, do not hold the handle of the power supply
unit or the fan unit. The handle might come off, resulting in the Switch falling and
possibly causing injury. In addition, the module might become damaged, resulting in
a fire or electric shock.
 When moving an EPU, do not hold the handle of the power supply module. The handle
might come off, resulting in the Switch falling and possibly causing injury. In addition,
the module might become damaged, resulting in a fire or electric shock.