Instruction manual

MA-7 AX36S-H001-50X
1 Components Overview
1.1 Main Device
1.1.1 AX2430S-24T/AX2430S-24TD/AX3630S-24T/AX3630S-24TD/AX3
640S-24T Models
Table 1-2 on page 5 is corrected as follows:
Corrections
Table 1-2 LED indication, switches, and connectors
Number Name Type Description Details
(1) PWR Green LED Indicates power supply status Lit in green: Power on
Off: Power off or failure in power supply
(2) ST1
Green/Red
LED
Indicates device status Lit in green: Standby or operating
Blinking green: Getting ready (startup)
Blinking red: Partial failure in the device
Lit in red: Fatal failure in the device (operation
cannot continue)
Off: Power off or failure in power supply
(3) ST2 Green LED (Not used) Off
(4) MC Connector Memory card slot Memory card slot
(5) ACC Green LED Indicates memory card status
Lit: Accessing the memory card (do not
remove the memory card)
Off: Memory card idle mode (memory
cards can be inserted or removed)
(6) CONSOLE Connector CONSOLE port RS-232C port to connect a console terminal
(7) LINK
Green/Orange
LED
Lit in green: A link is established
Lit in orange: Detecting line disturbances
Off: Link failure or block when the green
ST1 LED is lit
(8) T/R Green LED
Indicates the operating status of
the SEP slot Ethernet port
Blinking green: Sending or receiving frames
(9) 1-24
Green/Orange
LED
Indicates the operating status of
the 10/100/1000BASE-T
Ethernet port
Lit in green: A link is established
Blinking green: A link is established and frames are
being sent or received
Lit in orange: Detecting line disturbances
Off: Link failure or block when the green
ST1 LED is lit
(10) RESET Switch
(momentary)
Manual reset switch of the
device
*1
Restarts the device
*1: The switch is behind the front panel. Use a screwdriver with a small head to press it.
5