Instruction manual

MA-7 AX36S-H001-50X

Appendix

Appendix B Physical Specifications of Network Interfaces

Appendix B.1a is added on page 181.

Addition

Appendix B.1a Ethernet 100BASE-FX

Table B-3a Physical Specifications for 100BASE-FX

Item Physical Specifications

Cable type Multiple-terminal mode

Core/cladding diameter 50 µm/125 µm 62.5 µm/125 µm

Transmission bandwidth 500 MHz·km 500 MHz·km

Laser center wavelength

1.270 to 1.380 µm

Optical transmission power (mean)

-23.0 to -14.0 dBm -20.0 to -14.0 dBm

Optical reception power (mean)

-31.0 to -14.0 dBm -31.0 to -14.0 dBm

Optical transmission loss (max)

8.0 dBm 11.0 dBm

Full-duplex

communication

2 m to 2 km

Transmission

distance

Half-duplex

communication

2 to 412 m

Appendix B.2 Ethernet 1000BASE-X Interface

Table B-7a is added on page 183.

Addition

Table B-7a Physical Specifications for 1000BASE-LHB

Item

Physical Specifications

Cable type Single-terminal mode Single-terminal mode (DSF)

Core/cladding diameter 10 µm/125 µm 8 µm/125 µm

Laser center wavelength

1.480 to 1.580 µm

Optical transmission power (mean)

+2.0 to +7.0 dBm

Optical reception power (mean)

-34.0 to -9.0 dBm

Optical transmission loss (max)

36.0 dB

Transmission distance 2 m to 100 km

2 m to 100 km

*1: When optical transmission loss is 16.0 dB or less, use an optical attenuator to adjust the loss.

*2: For transmission over a 100 km distance, use an optical fiber with dispersion of 20 ps/nm·km or less.