Instruction manual

MA-7 AX36S-H001-50X
4.12 Powering the Main Device On and Off
4.12.1 AC Power and AC (PoE) Models
The following note is added to the end of (1) Powering on on page 148:
Addition
If the device has been left unused for a long period (one month or more), when it is
powered on for the first time thereafter, the ST1 LED might light up red and the device
might not start up.
In this case, turn off the device, and then turn it on again.
4.12.2 DC Models
The following note is added to the end of (1) Powering on on page 149:
Addition
If the device has been left unused for a long period (one month or more), when it is
powered on for the first time thereafter, the ST1 LED might light up red and the device
might not start up.
In this case, turn off the device, and then turn it on again.
4.12.3 Power Redundancy Models
The following note is added to the end of (1) Powering on on page 150:
[Addition]
If the device has been left unused for a long period (one month or more), when it is
powered on for the first time thereafter, the ST1 LED might light up red and the device
might not start up.
In this case, turn off the device, and then turn it on again.
22