Instruction manual

MA-7 AX36S-H001-50X
SFPs (except for the SFP-T (T)) use lasers that are colorless and invisible. Do
not look directly into the optical transmitter/receiver area.
Do not attach other labels to the transceiver.
The transceivers have labels to certify that they are standard products of the
manufacturer and ALAXALA. These labels are attached so as not to interfere
with heat radiation from the transceiver or with the mechanism to prevent
dropping from the cage.
Attaching a label to a part that interferes with heat radiation or the mechanism to
prevent dropping from the cage might cause a failure in the transceiver or
damage to the device.
Make sure to use ALAXALA standard products, which have labels as shown in the
figures. If nonstandard products are used, correct operation is not guaranteed.
SFP-FX (T) is added as (1a) on page 64:
Addition
(1a) SFP-FX (T)
Figure 1-67a External appearance
(1) Label: ALAXALA SFP-FX (T)
Label color: White
(2) Handle color: Black
SFP-FX (T) is supported by the following two models: AX3640S-24SW and
AX3640S-24S2XW.
(1)
(2)
13