MA-7 AX36S-H001-50X ALAXALA AX3600S/AX2400S Hardware Instruction Manual Corrections Released July 23, 2010 (7th Edition) 1
MA-7 AX36S-H001-50X Preface This document contains corrections for the AX3600S/AX2400S Hardware Instruction Manual (© 2005, 2007 ALAXALA Networks Corporation. All rights reserved.). If you intend to use an AX2400S or AX3600S switch, please read this document carefully. This document applies to the following manual: No. 1 Manual Name ALAXALA AX3600S/AX2400S Hardware Instruction Manual Manual Number AX36S-H001-50 Trademarks y Ethernet is a product name of Xerox Corporation.
MA-7 AX36S-H001-50X Contents Introduction .....................................................................................................................................4 1 Components Overview ................................................................................................................5 2 Preparation for Installation ......................................................................................................... 15 3 Preparation of Interface Cables and Terminals ..........
MA-7 AX36S-H001-50X Introduction Limits for Harmonic Current Emissions The list of devices that meet the standards for harmonic current emissions is corrected as follows: Corrections Products conforming to the JIS C 61000-3-2 standards for harmonic current emissions Conforming devices: AX-2430-24T (AX2430S-24T) AX-2430-24TE (AX2430S-24T) AX-2430-24T2X (AX2430S-24T2X) AX-2430-24T2XE (AX2430S-24T2X) AX-2430-48T (AX2430S-48T) AX-2430-48TE (AX2430S-48T) AX-2430-48T2X (AX2430S-48T2X) AX-2430-48T2XE (AX2430S-4
MA-7 AX36S-H001-50X 1 Components Overview 1.1 Main Device 1.1.
MA-7 AX36S-H001-50X 1.1.
MA-7 AX36S-H001-50X 1.1.
MA-7 AX36S-H001-50X 1.1.
MA-7 AX36S-H001-50X 1.1.
MA-7 AX36S-H001-50X 1.1.
MA-7 AX36S-H001-50X 1.
MA-7 AX36S-H001-50X 1.7 Transceiver 1.7.1 SFP Descriptions of the SFP on pages 63 and 64 are corrected as follows: Corrections To use the SFP, mount it to the SFP slot of the main device. The SFP type can be identified by either of the following: y The shape and handle color of the SFP (except for the SFP-FX (T) and the SFP-SX (T)) y The label Note that the supported SFPs differ depending on the device. For compatibility between devices and SFPs, refer to Table 1-32 SFP list.
MA-7 AX36S-H001-50X SFPs (except for the SFP-T (T)) use lasers that are colorless and invisible. Do not look directly into the optical transmitter/receiver area. Do not attach other labels to the transceiver. The transceivers have labels to certify that they are standard products of the manufacturer and ALAXALA. These labels are attached so as not to interfere with heat radiation from the transceiver or with the mechanism to prevent dropping from the cage.
MA-7 AX36S-H001-50X SFP-LHB (T) is added as (5a) on page 65: Addition (5a) SFP-LHB (T) Figure 1-71a External appearance (1) (2) (1) Label: Label color: (2) Handle color: ALAXALA SFP-LHB (T) White Yellow-green 1.7.
MA-7 AX36S-H001-50X 2 Preparation for Installation 2.2 Installation Conditions 2.2.1 General Installation Conditions Tables 2-1 to 2-3 and 2-5 to 2-7 on pages 73 to 77 are corrected as follows: Corrections Table 2-1 General installation conditions of AX2400S series main devices (AC or DC power models) Model Name Item AX2430S -24T AX2430S -24T2X AX2430S -48T Dimensions (W × D × H)*1 Weight*2 Input voltage 5 kg or less Rated AX2430S AX2430S -48T2X -24TD 445 × 380 × 43 mm 5.
MA-7 AX36S-H001-50X *4: Heat emission of the main device only.
MA-7 AX36S-H001-50X Table 2-6 General installation conditions of AX3640S series main devices (power redundancy models 2 of 2) Model Name AX3640S-48T2XW Item AX3640S-24SW PS-D01 PS-A01 PS-D01 PS-A01 PS-D01 mounted mounted mounted mounted mounted mounted Single phase -48 V DC Dimensions (W × D × H)*1 445 × 440 × 43 mm Weight*2 9 kg or less Rated Input voltage AX3640S-24S2XW PS-A01 -48 V DC Single phase -48 V DC 100 to 120 V AC, 100 to 120 V AC, 100 to 120 V AC, 200 to 240 V AC*3
MA-7 AX36S-H001-50X 3 Preparation of Interface Cables and Terminals 3.
MA-7 AX36S-H001-50X Port/Slot Transceiver SFP Slot SFP-LHB (T) Interface 1000BASE-LHB Cable Connector Single-terminal mode optical fiber (core/cladding diameter = 10 µm/125 µm) Single-terminal mode (DSF) optical fiber (core/cladding diameter = 8 µm/125 µm) XFP Slot SFP-BX1U (T) 1000BASE-BX10-U Single-terminal mode optical fiber SFP-BX1D (T) 1000BASE-BX10-D (core/cladding diameter = 10 µm/125 µm) SFP-BX4U (T) 1000BASE-BX40-U SFP-BX4D (T) 1000BASE-BX40-D XFP-SR (T) 10GBASE-SR LC simplex
MA-7 AX36S-H001-50X 4 Installation of the Components 4.8 Inserting and Removing SFPs 4.8.2 Inserting or Removing SFP-SX (T)/SFP-SX2 (T)/SFP-LX (T)/SFP-LH (T)/SFP-BX1U (T)/SFP-BX1D (T)/SFP-BX4U (T)/SFP-BX4D (T) The section title on page 141 is corrected as follows: Correction 4.8.
MA-7 AX36S-H001-50X 4.9 Inserting and Removing XFPs The following note is added after the text on page 143: Addition The following procedures describe how to mount and dismount the type-A module. The same procedures apply to the type-B module.
MA-7 AX36S-H001-50X 4.12 Powering the Main Device On and Off 4.12.1 AC Power and AC (PoE) Models The following note is added to the end of (1) Powering on on page 148: Addition If the device has been left unused for a long period (one month or more), when it is powered on for the first time thereafter, the ST1 LED might light up red and the device might not start up. In this case, turn off the device, and then turn it on again. 4.12.
MA-7 AX36S-H001-50X Appendix Appendix B Physical Specifications of Network Interfaces Appendix B.1a is added on page 181. Addition Appendix B.1a Ethernet 100BASE-FX Table B-3a Physical Specifications for 100BASE-FX Item Physical Specifications Cable type Multiple-terminal mode Core/cladding diameter 50 µm/125 µm Transmission bandwidth 500 MHz·km 62.5 µm/125 µm 500 MHz·km 1.270 to 1.380 µm Laser center wavelength Optical transmission power (mean) -23.0 to -14.0 dBm -20.0 to -14.
