Specifications

3. Operations Required for Initial Installation
49
z Configuration command mode
In administrator mode, entering the configure command puts you in configuration command mode.
In this mode, you can use the configuration command to set and change the configuration of the switch.
Configuration command mode has a hierarchical structure.
(config)# in the above table is called global configuration mode. Below this prompt, input
modes are categorized according to the type of commands available. For details about
configuration command mode, see the applicable Software Manual Configuration Guide.
For details about the command input modes in which operation commands can be executed,
see the manual Software Manual Operation Command Reference.
For details about the command input modes in which configuration commands can be
executed, see the manual Software Manual Configuration Command Reference.