Specifications

2. Installing a Switch
41
[Step 8] Connecting an interface cable
Connect the interface cable to the interface port.
[Step 9] Turning on the power
Set the power switch of the AX3600S/AX2400S to ON.
Figure 2-36 Turning on the power
(1) Power switch
[Step 10] Turning on the EPU
Set the power switch of the EPU and the power supply module to ON to supply standby power to the AX3600S/
AX2400S.
1. Set the main power switch of the EPU to ON.
Figure 2-37 Turning on the power (EPU)
(1) Main power switch
For a PoE connection, if you disconnect and then re-connect a UTP cable within two
seconds of connecting the cable, the power class of the equipment on the power-receiving
side might not be recognized correctly.
When removing and re-connecting the cable, be sure to wait for at least two seconds.
Before setting the main power switch of the EPU to ON, you must set the power switches of
the installed power supply modules to OFF.