Specifications

2. Installing a Switch

[Step 7] Connecting the setup terminal

Connect the setup terminal to the switch.

1. Connect the setup terminal to the CONSOLE port of the AX3600S/AX2400S. Use an RS-232C cross cable for

the connection.

Figure 2-35 Connecting the setup terminal

(1) Setup terminal

(2) RS-232C cross cable

(3) CONSOLE port

2. Start the setup terminal.

3. Start the communication software.

4. Configure the communication software.

After the setup terminal is connected to the port, tighten the screws. Also make sure the

terminal is firmly connected.

For details about RS-232C cross cables, see 1.4 Preparing a setup terminal and cables.

For details about the communication parameters, see 1.4 Preparing a setup terminal and

cables. For details about how to configure the communication software, see the

documentation for the communication software.