Specifications

2. Installing a Switch
36
2. Connect the standby power cable to the EPU (press the cable until you hear a click).
Figure 2-30 Connecting the standby power cable (on the EPU side)
(1) Connector for supplying standby power (with a protection cap)
(2) Connector for supplying standby power
(3) Cable for supplying standby power
Do not remove the protection cap except to connect a cable. Using the AX3600S/AX2400S
without a protection cap could result in a fire or electric shock.
Before connecting or disconnecting a standby power cable, set the power switch of the
power supply module in the applicable slot to OFF.
When supplying standby power to multiple switches from a single EPU, connect the standby
power cable to standby power connector 2 and subsequent connectors. When doing so,
remove the protection cap before connecting the standby power cable.
Make sure you keep the removed protection cap in a safe place.