Specifications

2. Installing a Switch
29
[Step 2] Installing the EPU and power supply module
Install the EPU in the 19 inch cabinet rack. If you plan to supply standby power to multiple switches from a single
EPU, install the power supply module in the EPU.
1. Attach the rack mounting brackets to the EPU.
Figure 2-24 Attaching rack mounting brackets to the EPU
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) Screws (M3 x 6, 12 screws in all)
Do not hold the handle of the power supply module when moving an EPU. Doing so might
cause the handle to come off and the EPU to fall, possibly resulting in injury. Also, the EPU
or the power supply unit might become damaged, resulting in a fire or electric shock.
When placing the EPU on a desk, see the AX3600S/AX2400S Hardware Instruction Manual.
The supplied rack mounting brackets are designed for M5 screws. Prepare a rack that
accommodates M5 screws.
When installing the EPU in a rack, if you cannot maintain a 100-mm space (for cables) in
front of the EPU, slide the rack mounting brackets 50 mm toward you and attach them as
shown in the following figure.