Specifications

2. Installing a Switch
22
[Step 4] Installing a transceiver
Install the SFP or XFP transceiver if you have purchased one.
Insert the SFP transceiver with the lever raised as shown in the following figure until you hear a click.
Figure 2-14 Installing a transceiver (upper port)
(1) SFP
(2) SFP slot
Figure 2-15 Installing a transceiver (lower port)
(1) SFP
(2) SFP slot
The above figure shows an example for installing a transceiver in an SFP slot for an
AX3630S-24S2XW, AX3640S-24SW, or AX3640S-24S2XW. For other models (models with
four SFP slots), install an SFP transceiver in the direction shown in the figure.
Note, however, that if you install a transceiver in a lower SFP slot for an AX3630S-24S2XW,
AX3640S-24SW, or AX3640S-24S2XW, turn the transceiver upside down and install it as
shown in the figure below.
Use the same procedure to install an XFP transceiver in an XFP slot.