Specifications

2. Installing a Switch
18
2.
*Remove the connector cable from the power supply unit (pull the connector while holding the right and left
levers).
Figure 2-9 Removing the cable connector
(1) Cable connector
(2) Power supply unit
3.
*Connect the DC power cable to the cable connector.
Press the button with the tip of a screwdriver (pushing the button all the way in causes it to stay like that).
Figure 2-10 Connecting the DC power cable -1
(1) Button (white)
(2) -48 V
(3) 0 V
(4) Button (red)
Ground cables are supplied with no cable end treatment on the power supply side. Apply
appropriate terminal treatment such as connecting terminals appropriate for the power
supply.
For details about ground cables, see the AX3600S/AX2400S Hardware Instruction Manual.