Specifications

2. Installing a Switch
15
z DC power cable (DC model)
1. Connect the ground cable to the switch.
Figure 2-6 Connecting the ground cable
(1) Screws (M4 x 8)
(2) Ground cable
(3) Ground terminal
For details about the specified power cables, see the AX3600S/AX2400S Hardware
Instruction Manual.
Use the supplied power cable. Using another cable could result in a fire or electric shock.
In addition, do not use the supplied cable with other devices. Doing so could result in a fire
or electric shock.
Connecting or disconnecting the DC power cable to the power supply must be performed by
a trained technician or maintenance personnel. Terminal connections are required for
connection of the DC power cable to the power facility. For this reason, incorrect handling of
the DC power cable could result in fire or electric shock.
Before connecting or disconnecting a DC power cable, turn off the power supply. Failure to
do so could result in a fire or electric shock.
The DC power cable is supplied with no cable end treatment on the power supply side. Apply
the proper terminal treatment such as connecting terminals appropriate for the power supply.
For details about DC power cables, see the AX3600S/AX2400S Hardware Instruction
Manual.