Specifications

2. Installing a Switch
12
2. Install the switch in the rack.
Figure 2-3 Installing a switch in the rack
(1) Screws (M5 x 4)
(2) 19-inch cabinet rack
[Step 2] Connecting a power cable to the switch
Connect a power cable to the switch.
Use an AC power cable for AC models, an AC (PoE) models, and redundant power models (when an AC power
supply is installed). Use a DC power cable for DC models and redundant power models (when a DC power supply
is installed).
Before installing a switch in a rack, make sure that the switch is stable. Performing this
operation under unstable conditions could result in injury if the switch falls off the rack.
When installing a switch in a rack, use the supplied M5 screws.
When a switch is installed in a rack, use the cable holder supplied with the rack to fix the
power cable in order to prevent stress on the cable base.