Specifications

2. Installing a Switch
11
Figure 2-2 Attaching the rack mounting brackets by sliding them 50 mm forward
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) Screws (M3 x 6 for each bracket, 12 screws in all)
When installing the switch in a rack, if you cannot maintain a 100-mm space (for cables) in
front of the switch, slide the brackets 50 mm toward you and attach them as shown in the
following figure.
Use the supplied screws when you attach the rack mounting brackets to the switch.
Two types of rack mounting brackets are available:
• Those for an AC model and DC model
• Those for an AC (PoE) model, redundant power model, and EPU model
A 24P/EPU label is affixed to AC (PoE) models, redundant power models, and EPU models.
Use the correct brackets when attaching brackets to a switch.
The left rack mounting bracket is marked with an “L”, and the right with an “R”.