Specifications

2. Installing a Switch
10
2.1 Installing a switch
This section describes the procedure for installing an AX2400S or AX3600S series switch into a 19-inch
cabinet rack and turning on the power.
2.1.1 Installing a switch only
[Step 1] Installing a switch
Use the following procedure to install a switch into a 19-inch cabinet rack.
1. Attach the rack mounting brackets to the switch.
Figure 2-1 Attaching rack mounting brackets
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) Screws (M3 x 6 for each bracket, 12 screws in all)
When moving a redundant power model, do not hold the handle of a power supply or a fan
unit. Doing so might cause the handle to come off and the switch to drop, possibly resulting
in personal injury. Also, the switch might become damaged, which could result in a fire or
electric shock.
To install the switch on a desk, see the AX3600S/AX2400S Hardware Instruction Manual.
The supplied rack mounting brackets are designed for M5 screws. Prepare a rack that can
accommodate M5 screws.