Manualshelf

Specifications

ManualsBrandsAlaxala ManualsComputer equipmentAX2400S series
11121314151617181920
Safety Information
Safety-6
Do not use the switch with the protection cap removed.
z Do not remove the protection cap except when attaching a cable. Using a switch with no protection cap
could result in a fire or electric shock.
Note that the following label is affixed near the standby power connector due to the high output power of
EPU-B.
Handle power cables carefully.
z Do not place anything heavy on a power cable. Do not pull, bend, or modify a cable. Doing so could
damage the cable, resulting in a fire or electric shock. If the power cable is covered by a carpet, it is easy
to forget that the cable is there and to place something heavy on it.
z Use the supplied or a designated power cable. Using another power cable could result in a fire or electric
shock. Do not use a power cable supplied with a product other than an AX2400S or AX3600S series
switch. Doing so could result in a fire or electric shock.
z If the power cable is damaged so that the wires underneath the covering are visible or cut, stop using it,
and ask maintenance personnel to replace it. Discontinue using the cable to avoid the risk of a fire or
electric shock.
z Make sure the power plug is free of dust, and insert the plug completely up to the base of the prongs, so
that it is not loose. Using a power plug with dust on it or one that is imperfectly connected could result in
a fire or electric shock.
Do not overload the power outlet.
z Do not overload the power outlet by connecting multiple power plugs to the same outlet. Overloading the
outlet could result in fire or the circuit breaker tripping due to excessive power used, thereby affecting
other equipment.
Remove the power cable when installing or removing a power supply.
z When installing or removing a power supply, remove the power cable from the power supply. If the power
cable is connected and the power switch is turned off, power is still supplied to some circuits. Because of
this, if you install or remove a power supply with the power cable connected, a fire or electric shock could
result.