Instruction manual

1. Components Overview

Figure 1-63 AC power cable

Make sure to use this accessory power cable when a PS-A01 or PS-A03 is

connected to 100 V AC. Other cable except the bundled one may cause a fire

and/or an electric shock. In addition, use the accessory cable only for the Switch.

Otherwise, a fire and/or an electric shock may be the result.

Make sure to use a power cable specified by ALAXALA Networks Corporation when

a PS-A01 or PS-A03 is connected to 200 V AC. Otherwise, a fire or an electric

shock might result.

NOTE

For required specifications of power cables, see 2.3.2 Electrical power equipment

for 200 V AC.

(4) Ground cable

The cable (3 m long) is for grounding. Use it when a PS-D01 is inserted into any redundant

power model (AX3630S or AX3640S). This item is bundled with a PS-D01.

Figure 1-64 Ground cable

A PS-D01 does not have an accessory power cable. Make sure to use a power

cable for a PS-D01 specified by ALAXALA Networks Corporation. Otherwise, a fire

or an electric shock might result.

NOTE

For required specifications of power cables, see 2.3.4 Electrical power equipment

for −48 V DC (redundant power models (AX3630S and AX3640S)).