Instruction manual

1. Components Overview

When attempting to push the RESET button, do not use a tool with a fragile tip, a

pin or a paper clip, which can be caught or dropped inside the switch and will not be

taken out. A fire or an electric shock might be caused.

1.1.11 AX3630S-24S2XW/AX3640S-24S2XW models

The AX3630S-24S2XW and AX3640S-24S2XW models have the following hardware

specifications:

 Ethernet 10/100/1000BASE-T ports: 4

 SFP slots: 24

 XFP slots: 2

 Memory card slot: 1

 CONSOLE port: 1

 Power supply unit slots: 2

NOTE

Since Switch ports 1 to 4 are shared by the SFP slots and 10/100/1000BASE-T, the

ports cannot be assigned to both SFP and 10/100/1000BASE-T at the same time.

Configure each port so that it is either assigned to an SFP slot or as a

10/100/1000BASE-T port. (By default, ports 1 to 4 are SFP slots.)

For details about editing the configuration, see the Software Manual.

NOTE

For information about the SFPs and XFPs supported by the Switch, see 1.7.1 SFP

and 1.7.3 XFP.

(1) External appearance

Figure 1-34 Front view

(1) Memory card slot

(2) CONSOLE port

(3) XFP slot

(4) 10/100/1000BASE-T Ethernet port

(5) SFP slot

(6) Security tape