Instruction manual

1. Components Overview
13
Num
ber
Name
Type
Description
Details
(11)
1-24
Green/Orang
e LED
Indicates the operating
status of a
10/100/1000BASE-T
Ethernet port.
Lit in green: A link is established.
Blinking green: A link is established and
frames are being sent or received.
Lit in orange: Detecting line disturbances.
Off: A link failure or block when the green
ST1 LED is lit.
(12)
RESET
Button
(momentary)
Manual RESET button of
the device
#1
Restarts the device.
#1: The switch is behind the front panel. Use a small-head screwdriver to press it.
When attempting to push the RESET button, do not use a tool with a fragile tip, a
pin or a paper clip, which can be caught or dropped inside the switch and will not be
taken out. A fire or an electric shock might be caused.
1.1.4 AX3640S-24T2XW
The AX3640S-24T2XW model has the following hardware specifications:
 Ethernet 10/100/1000BASE-T ports: 24
 SFP slots: 4
 XFP slots: 2
 Memory card slot: 1
 CONSOLE port: 1
 Power supply unit slots: 2
NOTE
Since Switch ports 1 to 4 are shared by the SFP slots and 10/100/1000BASE-T, the
ports cannot be assigned to both SFP and 10/100/1000BASE-T at the same time.
Configure each port so that it is either assigned to an SFP slot or as a
10/100/1000BASE-T port. (By default, ports 1 to 4 are SFP slots.)
For details about editing the configuration, see the Software Manual.
NOTE
For information about the SFPs and XFPs supported by the Switch, see 1.7.1 SFP
and 1.7.3 XFP.